Stapleless stapler Harinacs Press type 5 sheets Blue

New
Low in Stock
Out of Stock
₱ 864.00
SLN-MPH105B
Please select the product option(s)
SKU#SLN-MPH105B
Innovative new way to staple, no more refilling needed. Safe, Economical , Convenient and Environment-friendly alternative to conventional staplers.
Folding the paper without using the needle. The paper can be closed without using the needle, so there is no need to replenish the needle. In addition, there is no need to separate the stapled paper when discarding it, and there is no need to worry about the needle getting into other things.

Adopts a press-lock type, where the binding section is smart. We can easily remove binding paper just to rub binding part with hard things such as pen caps. The binding area does not become thick, so it does not become bulky when stacked.

Compact design / palm size, can be used both on hand and on hand. Can be bound at the corner or sideways. There is also a convenient mark on the corner binding.


* Does not have the same holding power as a stapler that uses a needle. * The number of sheets displayed is the value when using copy paper (PPC paper 64g / ㎡). * The binding area will be uneven due to pressure bonding. * Depending on where toner adheres, the type of paper (thickness and paper quality) and the environment (extremely dry, etc.), binding may be weak, the number of binding sheets may be small, or binding may not be possible. * It cannot be used for things other than paper such as film and those with adhesive. * Be sure to try using unnecessary paper before use. * Please do not close the same place twice. * Insert the paper as far as it will go and push the lever firmly to the end.
SPEC:
● Outer dimensions W ・ D ・ H / 34 ・ 95 ・ 85(mm) / 1.3 ・ 3.7 ・ 3.3(in)
● Recycled material mixing ratio / lever cover / middle cover / under cover: R-ABS100%
● Material / lever cover / middle cover / under cover: R-ABS , Paper insertion slot: ABS, stopper: POM, rear cover: PP, body: steel
● Number of binding sheets / copy paper (PPC paper) approx. 5
● binding dimensions: 1.6 x 10 mm
● Body color/ B・・・Blue、G・・・Green、P・・・Pink、W・・・White


※This product does not offer the same strength as conventional needle staplers. ※The indicated number of papers applies to copy paper (64/㎡ PPC paper). ※The stapled surface will have an uneven surface due to crimping. ※Surfaces with toner, paper type (thickness and quality), and environment (extreme dryness) may affect staple quality or number of papers that can be stapled together, or completely affect the product's ability to staple papers. ※Cannot be used with film-type non-paper material or paper with adhesive. ※Always test use with scrap paper before use. ※Do not use the edge of paper or the same area twice. ※Insert paper as far as possible and press down firmly on the lever.

Country of Origin: CHINA
Folding the paper without using the needle. The paper can be closed without using the needle, so there is no need to replenish the needle. In addition, there is no need to separate the stapled paper when discarding it, and there is no need to worry about the needle getting into other things.

Adopts a press-lock type, where the binding section is smart. We can easily remove binding paper just to rub binding part with hard things such as pen caps. The binding area does not become thick, so it does not become bulky when stacked.

Compact design / palm size, can be used both on hand and on hand. Can be bound at the corner or sideways. There is also a convenient mark on the corner binding.


* Does not have the same holding power as a stapler that uses a needle. * The number of sheets displayed is the value when using copy paper (PPC paper 64g / ㎡). * The binding area will be uneven due to pressure bonding. * Depending on where toner adheres, the type of paper (thickness and paper quality) and the environment (extremely dry, etc.), binding may be weak, the number of binding sheets may be small, or binding may not be possible. * It cannot be used for things other than paper such as film and those with adhesive. * Be sure to try using unnecessary paper before use. * Please do not close the same place twice. * Insert the paper as far as it will go and push the lever firmly to the end.
SPEC:
● Outer dimensions W ・ D ・ H / 34 ・ 95 ・ 85(mm) / 1.3 ・ 3.7 ・ 3.3(in)
● Recycled material mixing ratio / lever cover / middle cover / under cover: R-ABS100%
● Material / lever cover / middle cover / under cover: R-ABS , Paper insertion slot: ABS, stopper: POM, rear cover: PP, body: steel
● Number of binding sheets / copy paper (PPC paper) approx. 5
● binding dimensions: 1.6 x 10 mm
● Body color/ B・・・Blue、G・・・Green、P・・・Pink、W・・・White


※This product does not offer the same strength as conventional needle staplers. ※The indicated number of papers applies to copy paper (64/㎡ PPC paper). ※The stapled surface will have an uneven surface due to crimping. ※Surfaces with toner, paper type (thickness and quality), and environment (extreme dryness) may affect staple quality or number of papers that can be stapled together, or completely affect the product's ability to staple papers. ※Cannot be used with film-type non-paper material or paper with adhesive. ※Always test use with scrap paper before use. ※Do not use the edge of paper or the same area twice. ※Insert paper as far as possible and press down firmly on the lever.

Country of Origin: CHINA